Maintenance and care
Fig. 54
Removing the front wheel
1
Axle screw
9.5
Replacing a defective bulb
NOTICE
Damage to the lighting due to moisture penetration
During installation, ensure that the plates are seated
accurately in the housing.
Ensure that the screws are seated tightly against the
plate.
INFORMATION
Lamp housings and lamps can both be ordered from the
specialist dealer.
100
Ottobock
|
1
Fig. 55
1
Notch (apply screwdriver here)
2
LED headlight
Replacing the front direction indicator lamp
1. Remove the fuse (see previous section).
2. Set a small screwdriver into the notch in the direction in-
dicator housing and flip the cover down (see fig. 55,
item 1).
3. Remove the cover.
4. Turn the defective bulb slightly to unlock it, then remove
it.
5. Grasp the new bulb with a cloth, set it into the socket,
and lock it in place (see fig. 56).
Headlights
Skippi Plus