Kemper PROFILER Main Manual page 90


Wah Pedal (MIDI control change #1)
Besides the classic wah wah, the PROFILER offers numerous other effects that can be controlled by the Wah Pedal,
such as Wah Vowel Filter or Wah Pedal Booster. These are all referred to as "wah" effects, and are shown in
orange.
Again, the assignment of the wah controller to an expression pedal is global. In addition, you need a Rig with one of
these wah effects, and the settings of Pedal Mode and Pedal Range within these Stomps must be set up for pedal
control. As a quick start, you might choose a preset from the list of factory presets. Open, for example, C module,
knob, and select preset "WWAH Cry" – your Wah Pedal should simulate a Cry Baby* now.
turn the BROWSE
You are free to use as many wah effects as you like - they will all respond simultaneously. Please refer to the
Stomps chapter in this manual for more information.

Volume Pedal (MIDI control change #7)
The Volume Pedal is also assigned globally. However, its location in the signal flow (e.g. "Input") and its consequent
impact on amplifier gain or delay spillover, can be customized by Rig. It's also possible to limit its minimum range by
Rig, or even transform it into a booster pedal in specific Rigs. For more detailed information please refer to the
Volume Pedal paragraph below.

Pitch Pedal (MIDI control change #4)
The Pitch Pedal is dedicated to the pitch shifter effects
classic Whammy* effect. Please refer to the corresponding chapter for details.
Expression Pedals and Foot Switches 90
Pedal Pitch and Pedal Vinyl Stop, ideal for creating the
Wah