Vibe Phaser; Flanger - Kemper PROFILER Main Manual


Stereo
Offsets the phaser modulation of the left and right signals. With extreme left or right settings, the modulation will go
in opposite ways. At the middle position (zero), the phaser will be mono. Use small deviations to the left or right of
zero to achieve a gentle stereo effect.

Vibe Phaser

The Vibe Phaser is inspired by the famous Univibe* effect. The Univibe* is basically a phaser, but with an
asymmetrical modulation curve that stays up for quite a while, then bounces down very quickly; apart from that, it is
identical to the regular phaser. For the most authentic results, set the number of Phaser Stages to "4".
*All product names and company names are trademarks of each respective holder. Kemper GmbH is not associated
or affiliated therewith. Those trademarks are only used for historical reference or to identify products whose sounds
or tone inspired us during development.

Flanger

The Flanger effect shares the same heritage as the Phaser, and the resulting sound is somewhat related, too. We
therefore we put both in the same effect family, with color code magenta (purple). However, the Flanger is not based
on analog filter technology, but on very short bucket-brigade delays.
The parameter set for the flanger is almost the same as that of the phaser; only the parameters "Peak Spread" and
"Stages" are not available. Thanks to the overlapping parameter set, you can use
between phasers and flangers without altering the basic parameter values.
✓
You can find a similar flanger, called Wah Flanger, in the group of
Pedal.
TYPE to switch back and forth
Wah Stomps that can be controlled by the
Effects 155
Wah