Continuous Controllers - Kemper PROFILER Main Manual

Continuous Controllers

The following MIDI control change numbers can be continuously controlled from a MIDI pedal or sequencer. You will
also find the four pedal nodes here for the Morph, Wah, Volume, and
foot controllers allow you to limit this range by setting a minimum and maximum value. However, this is not
necessary for the Wah, Morphing, Pitch and Volume Pedal controllers, since the ranges can be determined in the
respective effect, as well as in the
#1 Wah Pedal
#4 Pitch Pedal
#7 Volume Pedal
#10 Panorama
#11 Morph Pedal
#68 Delay Mix
#69 Delay Feedback
#70 Reverb Mix
#71 Reverb Time
#72 Gain
#73 Monitor (Output) Volume
Volume Pedal settings.
Pitch Pedal. The value range is 0-127. Some
MIDI 206