Tremolo / Auto Panner - Kemper PROFILER Main Manual


Distance
Use the "Distance" parameter to adjust the distance of the microphones from the cabinet from 4 cm up to 50 cm. The
closer the microphones, the more intense the amplitude modulation (tremolo) will be. At the maximum setting, there
is no noticeable amplitude modulation.

Mix
Use the "Mix" parameter to adjust the balance between the input signal and the output of the Rotary Speaker effect.
For an authentic sound, this is best left at "100%", but it can be very useful if you want to achieve sounds that are
less conventional.

Tremolo / Auto Panner

The Tremolo modulates the level of the signal in a periodic manner.

Rate
Use the "Rate" soft knob to adjust the speed of Tremolo modulation; this parameter is almost continuously variable,
but stays in sync to the actual tempo of the Rig. The tempo can be dialed in manually or tapped on the
When "Tempo" is engaged, the rate will be displayed in musical values. Please refer to the
information about the tempo sources and settings.

Depth
Use the "Depth" parameter to adjust the intensity of the modulation.
Effects 152
TAP button.
Tempo chapter for more