Connecting Pedals And Switches To The Profiler - Kemper PROFILER Main Manual

Expression Pedals and Foot Switches 97
be assigned with soft knob labeled "Switch Ring". Please set polarity according to the kind of the switches used:
select "Normal" for a switch that is closed in idle state, and "Inverse" for a switch which is open in idle state. Don't
forget to hold "Calibrate" and trigger each switch once.
✓
You can find a tutorial video focused on technical conditions, and all other aspects of connecting expression pedals
and switches to PROFILER or Remote at: www.kemper-amps.com/video

Connecting Pedals and Switches to the PROFILER

Connecting pedals and switches to PROFILER directly
The PROFILER features two jacks for the direct connection of expression pedals or switches, which can be
configured in System Settings on the "Pedal 1-2" pages