Booster Stomps (Red) - Kemper PROFILER Main Manual

*All product names and company names are trademarks of each respective holder. Kemper GmbH is not associated
or affiliated therewith. Those trademarks are only used for historical reference or to identify products whose sounds
or tone inspired us during development.

Booster Stomps (Red)

Treble Booster A classic sound-shaping stomp pedal that does not feature a built-in distortion. Instead,
the Treble Booster is made to shape the high frequencies of your guitar so that they
improve the distortion as well as making it more transparent, especially when being
used with old amplifier models that were not originally designed for distortion. Use the
"Tone" control to shape your sound.
Before you reach for the Treble Booster, please try the
amplifier module first. This will also modify the distortion result, but directly in the
PROFILE, and with fewer changes to the residual frequency response.
Lead Booster This is a tunable peak filter that can emphasize specific frequencies of your guitar. Set
the desired sound by using the "Tone" control. The Lead Booster can neutralize the
Treble Booster to a certain extent, when they are used together in front of the stack.
The Pure Booster features a "Volume" control like all the other effects, but that's it. The
Pure Booster
"Volume" control will boost or attenuate the signal without coloring the sound. When
you place it in front of the amp or a distortion stomp, the Pure Booster has the same
effect as the gain or drive control; placed after the stack section, the Pure Booster
becomes a simple volume control, with no further coloration of the signal.
Wah Pedal Booster With the Wah Pedal Booster, you can use the
of having to use a dedicated volume pedal. The parameters are identical to the
"Volume
Pedal" parameters.
Definition parameter in the
Wah Pedal to control the volume, instead
Effects 143