Volume Pedal Function - Kemper PROFILER Main Manual

While it would be possible to connect two expression pedals like described in the
most practical approach in this case is to connect one expression pedal to control wah, volume and pedal pitch
effects, and then a dual switch to step up/down through the Rigs.
If that's what you want to do, connect your expression pedal to the
function in System Settings on the page
the pedal all the way from heel through to toe position. The bar below "Calibrate" should reflect that move. Now, you
can release "Calibrate". Next, navigate to the
>Pitch". Now, the Wah Pedal will also control volume, as well as pedal pitch effects.
✓
If "WahPedal >Volume" is selected, those two functions are mutually exclusive. As soon as a wah effect is active, the
Wah Pedal controls this Wah effect, while volume stays flat. As soon as there is no wah effect in the current Rig, or
the wah effect is switched off, the Wah Pedal controls volume.
Then, plug the TRS-cable of the dual switch into the
follow the instructions at Connecting a PROFILER
instructions at Single and Dual Switches of Other
of the two switches once. Then, navigate to the "Pedal Links" page in System Settings and assign "Rig up" and "Rig
down" to your two switches. In Browser Mode, you can step through the Rigs according to the option selected for
"View" and "Sort Order". In
will be skipped automatically. In
✓
A tutorial video demonstrating how to set-up switches connected to the PROFILER is available at:
www.kemper-amps.com/video

Volume Pedal Function

In difference to the Wah and
this would allocate a Stomp or effect module every time you wanted to use the pedal. Instead, you will find two
parameters for the Volume Pedal in Rig
"Pedal 1". Then, press and hold the soft button "Calibrate" while sweeping
"Pedal Links" page and activate "WahPedal >Volume" and "WahPedal
PEDAL 2
Switch. If you are using a switch of any other brand, please follow
Brands. Don't forget to press and hold "Calibrate" and trigger each
Performance Mode, you can step through Slots and Performances, while disabled Slots
Mode, it switches between "KEMPER Amp" and "Reference Amp".
PROFILER
Pitch Pedal functions, the Volume Pedal
Settings.
Expression Pedals and Foot Switches 98
Mainstream
PEDAL 1 input, and assign the Wah Pedal
input. If this is a KEMPER PROFILER Switch, please
function does not have its own effect type, as
example above, the