One Pedal: Purist - Kemper PROFILER Main Manual

Expression Pedals and Foot Switches 95

One Pedal: Purist

One wah pedal to be shared for volume and pedal pitch effects
There is no way to combine Morph and Volume Pedal as this would imply logical conflicts. Therefore, in this setup
Morphing can only be triggered via the Remote's buttons - either
Rig Buttons 1-5, or via customization of one of the
LOOPER, TUNER or TAP buttons. Alternatively, you could connect an additional external switch and assign the
Morph function to it. We will cover the subject of external switches soon.
The one pedal then needs to be set-up as a wah pedal. The PEDAL 5 input is already prepared for it by default. How
Luxury. Then select "WahPedal
to connect and calibrate has been already explained in the example Four Pedals:
>Volume" and "WahPedal >Pitch" on the Pedal Links page in System Settings.
✓
If "WahPedal >Volume" is selected, those two functions are mutually exclusive. As soon as a wah effect is active, the
Wah Pedal controls this wah effect, while volume stays flat. As soon as there is no wah effect in the current Rig, or
the wah effect is switched off, the Wah Pedal controls volume. All other pedal links allow you to control their effects
simultaneously. So, a Morph Pedal could morph and control wah, as well as pedal pitch effects at the same time, if
those links are selected. A Wah Pedal could control wah and pedal pitch effects together, if "WahPedal >Pitch" is
checked.