Two Pedals: Mainstream - Kemper PROFILER Main Manual

Expression Pedals and Foot Switches 94

Two Pedals: Mainstream

One dedicated pedal for volume and the Morph Pedal to be shared for wah and pedal pitch effects
Please follow the above instructions to connect and calibrate your Volume and Morph Pedals. You have neither a
dedicated Wah nor dedicated Pitch Pedal.
Then, go to the "Pedal Links" Now, your Morph Pedal is the master for Morphing, wah and pedal pitch effects, and
controls them all simultaneously. Most of the time, you might want to control just one of these effects. So, if you want
to control just Morphing, make sure that no wah or pedal pitch effects are activated. To control just wah, switch off all
pedal pitch effects and make sure there are no parameters set up for Morphing. If you want to use Pedal Pitch only,
make sure that no wah effect is active, and that the current Rig includes no morphed parameters. In order to avoid
accidental pitch jumps, the Morph Pedal needs to be moved through the heel position and will therefore always start
shifting from the original pitch.
Remote's Rig Buttons
There is another possible setup with two pedals: you could decide to control Morphing via the
1-5 and skip the Morph Pedal controller altogether. In this case, you would end up with a dedicated volume pedal,
plus a wah pedal reassigned to pedal pitch effects. The wah pedal would be set up with "WahPedal >Pitch", like in
the example Three Pedals: Comfortable above.