Phaser Oneway & Flanger Oneway; Equalizer Stomps (Yellow); Graphic Equalizer; Studio Equalizer - Kemper PROFILER Main Manual

Effects 156
Phaser Oneway & Flanger Oneway
always modulate up and down, their "oneway" counterparts go either up or
While the regular Phaser and Flanger
down in an infinite helix. This behavior necessitates a bipolar "Rate" control: turn it to the right half to make the helix
go up, and to the left half to bring it down. At the middle position the motion will stop.

Equalizer Stomps (Yellow)

This group of stomp effects offers you a nice selection of high-quality equalizers. They can be placed either before or
after the stack section, as each configuration has a different impact on the sound.
The "Mix" parameter is common to all the equalizers and controls the impact of all the EQ bands combined. Graphic
Equalizer, Studio Equalizer, and Metal Equalizer offer "Low Cut" and "High Cut" in addition to their other controls.

Graphic Equalizer

An 8-band, octave equalizer, with fixed frequency bands ranging from 80 Hz to 10 KHz. Very often, this will prove to
be the easiest way to control the frequency spectrum of your sound.
Each band can be boosted or attenuated by up to 12 dB. You can control the mix of the original and the equalized
sound by using the "Mix" soft knob.

Studio Equalizer

The Studio Equalizer is a full, 4-band parametric equalizer, similar to those found in professional mixing desks or
digital workstations. It offers one low shelf, one high shelf and two peak equalizer bands. All four bands have
adjustable frequency, and the two peak EQ bands come with adjustable bandwidth or Q-factor.