Tuner Button; Effect Buttons I-Iiii; Assigning An Effect Module - Kemper PROFILER Main Manual

PROFILER Remote 193

TUNER Button (4)

Use this to activate Tuner Mode, instead of moving a volume pedal into heel position. If the option "Mute Signal" is
activated, your guitar will be muted while you tune it.
✓
If you don't require TAP, TUNER or
LOOPER buttons in their default function you are free to assign other switching
functions or completely deactivate these buttons, on the Remote Settings page in System Settings.

Effect Buttons I-IIII (5)

These four buttons can be flexibly assigned to switch effect modules on/off. They can also be used to toggle features
in certain effects. Their respective assignments are stored per Rig. Each button can be assigned to multiple effect
modules at the same time as Action & Freeze functions.

Assigning an Effect Module

Assigning switching functions to the Effect Buttons is simple: just press and hold an Effect Button on the Remote for
example Effect Button IIII and press the desired module button, e.g. Module D, on the front panel of the PROFILER
at the same time. Done!