Customer Support - Kemper PROFILER Main Manual


Internal power amp has switched off
If the built-in power amp (Powerhead or PowerRack) switches off during normal operation, this might be an
indication of overheating. Please make sure there is sufficient air circulation and that the PROFILER isn't positioned
on top of other devices producing heat. The power amp will automatically reactivate as soon as its temperature
normalizes.

Unexpected events
In case any inputs or outputs don't operate as you would expect, or you experience any other unpredicted behavior,
the soft button "Init Globals" in
Section as well as returning all
of settings. Your stored Rigs, presets, Performances, and Slots won't be impacted by this reset. You could also
restore your latest backup, which will recover your complete global settings as well as entire content. We strongly
recommend that you create backups
new content, and that you keep your USB memory stick handy. Given the size of customary USB stick you could
easily keep hundreds of PROFILER backup archives available. Another best practice is to store the operating
system file "kaos.bin" in the root directory of your USB stick. This way, not only can you effectively upgrade your
PROFILER, but also keep some additional recovery options.

Customer Support

Any other error states under current operating system should be addressed to Customer Support, either via phone or
e-mail. More information about the Kemper hotline, along with an e-mail template, can be found on the web-page
www.kemper-amps.com/contact. Please report all relevant information, such as your operating system revision, and
how the situation can be reproduced.
System Settings will reset most global parameters in System Settings and
locks to their default state. This way, you are always able to recover a defined state
whenever you have performed any major parameter adjustments, or created
Trouble Shooting 242
Output