Wah Parameters - Kemper PROFILER Main Manual

Wah Parameters


Manual
This is the base value for the wah effect. It determines the zero or heel position of the pedal. When
set to "Off", "Manual" controls the static pedal position.

Peak
This parameter controls the intensity of the effect. The actual choice of the physical parameter depends on the effect
type: for wah wah, and other filter effects, the "Peak" control varies the Q-factor (resonance) of the filters. On other
effects, it controls the feedback of the effect, which is somewhat similar to Q-factor or resonance.

Pedal Range
This parameter determines the maximum impact of the pedal, as an offset to the value selected for the "Manual"
parameter. Negative values of "Pedal Range" will reverse the swell direction of the pedal or touch effect, so the
effect will go down when you push the pedal forward.

Peak Range
Determines to what extent the position of the pedal influences the peak intensity. Many original wah pedals have a
dependency between the pedal position and the Q-Factor of the wah filter. This can be controlled by "Peak Range".

Pedal Mode
Selects how the wah effect responds to the Wah Pedal, or to touch response.
Effects 137
"Pedal Mode" is