Browsing Amps Or Cabinets - Kemper PROFILER Main Manual

Working with Amplifier PROFILEs, Cabinet PROFILEs, Power Amps and Guitar Cabinets 54

Browsing Amps or Cabinets

There are two sources from which to select Amplifiers, Cabinets or the complete stack. With the respective module
or section in focus, turn the
or "From Rigs". The "From Rigs" method will insert the element in focus, e.g. Cabinet, from other Rigs in your
browse pool, according to the View that you have selected on the home screen. This method can be applied to the
Amplifier and cabinet modules, as well as the entire stack section.
Module and section presets contain modules or sections of the signal chain, e.g. amplifier, cabinet or stack, which
users can store themselves. If you haven't created any Presets yet, you might find just the selection that we
prepared and included in the factory content for demonstration purposes.
There are two additional methods to insert modules from other Rigs:
•
Copy and paste any module or section from another Rig using the
•
Lock any modules and/or sections while you browse through the Rigs in your browse-pool.
by one click – soft buttons will now allow you to select between "Presets"
BROWSE knob
COPY and PASTE buttons.