Effect Switches - Kemper PROFILER Main Manual

Effect Switches

MIDI control change numbers can be used to switch effects on or off. The switch for the
similar way. Non-zero values (1-127) trigger "on", while zero triggers "off". Some other switches feature a dedicated
hold function, when they are held down:
•
The TAP button triggers the
•
The Performance up/down switches (described further below) start scrolling the Performances when held.
For the hold functions to behave correctly, your switch must transmit a MIDI message both when it is pressed (key-
on), and when it is released (key-off). Program your remote controller so that it sends a non-zero value (1-127) on
key-on, and a zero on key-off. Some remote controllers are not able to send a key-off event and are therefore unable
to take advantage of the hold function, unfortunately. In this case, send a value of zero for the key-on event, so that
hold does not get triggered accidentally.
#16 All effect modules from A to MOD invert on/off
#17 A module on/off
#18 B module on/off
#19 C module on/off
#20 D module on/off
#22 X module on/off
#24 MOD module on/off
#26 DLY module on/off (without spillover)
Beat Scanner when held.
MIDI 207
Tuner Mode works in a