Hyper Chorus - Kemper PROFILER Main Manual


Depth
Use the "Depth" parameter to adjust the intensity of the chorus modulation.
✓
Tip: for the original Chorus Ensemble* sound leave the "Depth" parameter at exact middle position and use the
"Rate" parameter to create your favorite sound - the original devices did not have a depth control.
*All product names and company names are trademarks of each respective holder. Kemper GmbH is not associated
or affiliated therewith. Those trademarks are only used for historical reference or to identify products whose sounds
or tone inspired us during development.

Crossover
Each of the chorus algorithms feature the "Crossover" parameter. By raising the value of "Crossover" you can protect
the lower frequencies from being influenced by the chorus modulation, thus giving the sound a stable bottom end.
This feature was inspired by specialized bass chorus units; we found, however, that this type of crossover control is
not merely an advantage for bass sounds - it is suitable for shaping any sound.

Hyper Chorus

The Hyper Chorus is probably one of the most complex choruses ever made; it is a six-voice chorus with up to three
delay lines for both the left and right channels. Despite this, it is staggeringly simple to use, as you only need adjust
the "Depth" parameter to achieve a huge, warm sound.

Depth
By adjusting "Depth", you change the amount of detune and fatness that the chorus adds to the signal - everything
else is perfectly adjusted to give you the lushest chorus sound with no further tweaking necessary. You can even
Effects 147