Profiling A Rotary Speaker Cabinet - Kemper PROFILER Main Manual

•
Connect the microphone (instead of the DI box) to the return of the PROFILER. If you want to disengage the DI box,
and connect the guitar cabinet directly, don't forget to put your reference amp on standby first.
•
Prepare for the capture of the Studio PROFILE by adjusting the microphone positions. To optimize your mic'ed
sound, use either the 4-band equalizer in PROFILER Mode, or the equalizers on your mixing desk.
•
Capture the Studio PROFILE.
Now, you can merge the cabinet portion of the Studio PROFILE into the Direct Amp PROFILE. Here's the procedure
in detail:
•
Select the Studio PROFILE in Browser Mode.
•
Hold the CABINET button for at least one second until it's in focus.
•
Press COPY on the front panel.
•
Press EXIT and select the respective Direct Amp PROFILE.
•
Hold CABINET button again until it's in focus.
•
Press PASTE.
•
"Merge Cabinet" will appear under a
You can undo/redo the merging by pressing "Merge Cabinet" again and compare results.
•
•
Press EXIT and store your new PROFILE.
Done!

PROFILING a Rotary Speaker Cabinet

The PROFILER already ships with a Rig named "CK Rotary Speaker", captured from the real thing, but if you have
access to a different brand of rotary speaker, you can take your own PROFILEs, too.
To do this, first set up the rotary speaker as you would in a normal recording situation. Next, connect the whole chain
to the PROFILER, just as you would with a guitar amp. This time, however, two microphones should be used to
capture the cabinet - one for the bass rotor, and one for the tweeter horn.
soft button. Push it!
PROFILINGTM an Amp 238