Alternative Procedure For Input Leveling - Kemper PROFILER Main Manual


Summary
For correct leveling and reproduction of a distorted Rig with a reamped instrument, two level settings must be
performed: the absolute reamp level at the recording device and the amount of distortion by "Reamp Sens". For
clean sounding Rigs, only the absolute reamp level is necessary.
✓
Two tutorial videos explaining configuration of
www.kemper-amps.com/video

Alternative Procedure for Input Leveling

The original "Clean Sens" leveling from step two, and the final leveling of "Reamp Sens" have a kind of opposite
relationship that can be used for easier and safer leveling, under two conditions:
•
The Rig in question is a distorting one.
You have memorized the original "Clean Sens" setting used to record the pure instrument.
•
First, set "Reamp Sens" to the opposite value of the original "Clean Sens" setting (e.g. 2.0 dB, when "Clean Sens"
was -2.0 dB). Now, level the desired amount of distortion by adjusting the output volume on the recording device.
Once this is done, you will have found the correct input level by default. There is no need to watch the INPUT LED
with this procedure.
Output Sources for recording and reamping can be found at:
Instrument Input and Reamping 88