Rig Change In Performance Mode - Kemper PROFILER Main Manual

#27 DLY module on/off (with spillover)
#28 REV module on/off (without spillover)
#29 REV module on/off (with spillover)
#30 Tap (values 1-127 activate
triggers tempo)
#31 Tuner Mode
#33 Rotary Speaker Speed
#34 Delay Infinity
#35 Delay Freeze
✓
If you prefer triggering Tap Tempo
zero.

Rig Change in Performance Mode

Performance Mode offers 125 Performances, each with five Slots, allowing to store up to 625 Rigs independently
from your browse pool. A typical application for a Performance would be to organize all the sounds you need for a
song in one place.
All Slots in Performance Mode have fixed MIDI assignments. To accommodate for varying remote controller
capabilities there are two methods available to address and load a Rig in any Slot.
Beat Scanner, value 0 deactivates Beat Scanner, any value
select (signal muted, if "Mute Signal" is flagged in Tuner Mode)
(any value toggles between slow and fast)
(any value toggles between on and off)
(any value toggles between on and off)
without ever activating Beat Scanner, send control change #30 always with value
MIDI 208