Delayed Sweep - Rigol DS6000 Series User Manual

RIGOL
3 To Set the Horizontal System

Delayed Sweep

Delayed sweep can be used to enlarge a length of waveform horizontally to view the
details of the image.
MENU
Press MENU in the horizontal control area (HORIZONTAL) and then press Delayed
to turn the delayed sweep on or off. Note: To enable delayed sweep, the current time
base mode must be "Y-T" and the "Pass/Fail test" must be disabled.
In delayed sweep mode, the screen is divided into two display areas as shown in the
figure below.
The waveform before
enlargement
Main time
base
Delayed
Sweep
Time Base
延迟扫描时基
The waveform after enlargement
3-2 DS6000 User's Guide