Working Environment - Rigol DS6000 Series User Manual

RIGOL

Working Environment

Temperature
Operating: 0℃ to +50℃
Non-operating: -20℃ to +70℃
Humidity
Under +35℃: ≤90％ relative humidity
+35℃ to +40℃: ≤60％ relative humidity
WARNING
To avoid short circuit inside the instrument or electric shock, please do
not operate in humid environment.
Altitude
Operating: less than 3 km
Non-operating: less than 15 km
Installation (Overvoltage) Category
This product is powered by MAINS conforming to installation (overvoltage) category
II.
WARNING
Ensure that no overvoltage (such as that caused by a bolt of lightning)
can reach the product. Otherwise, the operator might be exposed to the
danger of an electric shock.
Installation (Overvoltage) Category Definitions
Installation (overvoltage) category I refers to signal level which is applicable to
equipment measurement terminals connected to the source circuit. Among these
terminals, precautions are done to limit the transient voltage to the corresponding
low level.
Installation (overvoltage) category II refers to the local power distribution level
which is applicable to equipment connected to the AC line (AC power).
XII DS6000 User's Guide