Rigol DS6000 Series User Manual page 169

6 To Make Measurements
4. Adjust the X (Y) cursor positions (note that under the same menu
page, you can also press
cursor)
When the display mode is "X" or when the display mode is "X-Y" and
SelectCursor is set to "X", you can adjust the positions of the X cursors.
Adjust cursor A: press CursorA and use

A. During the adjustment, the measurement result will change accordingly.
The adjustable range is limited within the screen.
Adjust cursor B: press CursorB and use

B. During the adjustment, the measurement result will change accordingly.
The adjustable range is limited within the screen.
Adjust cursors A and B at the same time: press CursorAB and use

adjust the positions of cursors A and B at the same time. During the
adjustment, the measurement results will change accordingly. The
adjustable ranges are limited within the screen.
When the display mode is "Y" or when the display mode is "X-Y" and
SelectCursor is set to "Y", you can adjust the positions of the Y cursors.
Adjust cursor A: press CursorA and use

A. During the adjustment, the measurement result will change accordingly.
The adjustable range is limited within the screen.
Adjust cursor B: press CursorB and use

B. During the adjustment, the measurement result will change accordingly.
The adjustable range is limited within the screen.
Adjust cursors A and B at the same time: press CursorAB and use

adjust the positions of cursors A and B at the same time. During the
adjustment, the measurement results will change accordingly. The
adjustable ranges are limited within the screen.
DS6000 User's Guide
continuously to switch the current
to adjust the position of cursor
to adjust the position of cursor
to adjust the position of cursor
to adjust the position of cursor
RIGOL
to
to
6-33