Horizontal Scale; Horizontal Position - Rigol DS6000 Series User Manual

3 To Set the Horizontal System

Horizontal Scale

Being similar to "Vertical Scale", the horizontal scale adjustment has two modes:
"Coarse" and "Fine".
Press MENU (in the horizontal control area (HORIZONTAL) on the front panel) 
ScaleAdjust to select the desired mode. Turn HORIZONTAL
the horizontal scale. Turn clockwise to reduce the horizontal scale and turn
counterclockwise to increase the scale.
The scale information (e.g.
change accordingly during the adjustment. The adjustable range of horizontal scale
is related to the model of the instrument.
DS610X: 500 ps/div to 1.000 ks/div
DS606X: 1 ns/div to 1.000 ks/div
Coarse (take counterclockwise as an example): set the horizontal scale in 1-2-5

step namely 500 ps/div, 1 ns/div, 2 ns/div, 5 ns/div...1.000 ks/div.
Fine: further adjust the horizontal scale at relatively smaller step.


Horizontal Position

Turn HORIZONTAL
knob clockwise to reduce the position and turning the knob counterclockwise to
increase the position. Pressing down the knob can quickly reset the horizontal
position or the delayed sweep position to 0.
In addition, to adjust the horizontal position with a small step value, you can perform
the following operations: rotate the inner knob of the navigation knob
MENU on the HORIZONTAL control area, and select Offset, then rotate the knob
. To quickly adjust the horizontal position within a relatively larger range, you can
rotate the outer knob of the navigation knob
amplitude of the outer
DS6000 User's Guide
) at the upper-left corner of the screen will
POSITION to adjust the horizontal position. Turning the
knob, the faster the variations in the values.)
. (The greater the rotation
RIGOL
SCALE to adjust
; or press
3-9