Power-Off Recall; System Time - Rigol DS6000 Series User Manual

RIGOL

Power-off Recall

You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off.
Press UTIL  System  Power On to select "Last" or "Default".
Last: restore the instrument to the setting at the last power-off.

Default: return to the factory setting of the system.


System Time

The system time is displayed at the lower-right corner of the screen in "hh:mm
(hour:minute)" format. When printing or storing a waveform, the file output will
contain this time information.
Press UTIL  System  System Time to turn on the time setting interface.
In the system time setting menu, press System Time to turn on the system time
interface. In this interface, the system time is displayed in "yyyy-mm-dd hh:mm:ss"
format. The item that can be modified currently (namely the item currently selected)
is in green and the other items are in white. Use
selected; then, press down
the next item. The order of the time modifications is year → month → date →
hour → minute → second. The setting range of each item conforms to the
convention.
Year: 1999 to 2099

Month: 01-12

Date: 01-31 (28, 29 or 30)

Hour: 00 to 23

Minute: 00 to 59

Second: 00 to 59

Press Apply to put the current setting into effect. The time at the lower-right corner
of the screen will be updated.
13-8
to confirm the modification and automatically select
13 System Function Setting
to modify the item currently
DS6000 User's Guide