One-Key Measurement - Rigol DS6000 Series User Manual

RIGOL

One-key Measurement

Press MENU at the left of the screen to turn on the measurement menu of the 29
parameters and then press the corresponding menu softkey to quickly realize
"One-key" measurement. The measurement result will be displayed at the bottom of
the screen. The 29 waveform parameters are as shown in the table below.
Table 6-5 29 Waveform Parameters
Parameter Type
Time Parameter
Delay and Phase
Parameters
Voltage
Parameter
Area Parameter
The icons of time, voltage and area parameter menu items and the measurement
results are always marked in the same color of the current measurement channel
(MEAS  Source) currently used. The delay and phase parameter menu items as
well as the measurement results are displayed in white; the numbers in the menu
items and results denote the source A and source B currently selected and the color
of the numbers are the same with the color of the channel currently selected (MEAS
 Setting  Type  "Delay" or "Phase"). For example,
Parameter Icons:
Measurement Results:
6-16
Parameter Name
Period, Frequency, Rise Time, Fall Time, + Width, -Width,
+Duty Cycle, -Duty Cycle (please refer to "Time
Parameters")
Delay A →B , Delay A →B , Delay A →B , Delay
A →B , Phase A →B , Phase A →B , Phase
A →B , Phase A →B
Phase Parameters")
Vmax, Vmin, Vpp, Vtop, Vbase, Vamp, Vavg, Vrms–N,
Vrms-1, Overshoot, Preshoot (please refer to "Voltage
Parameters")
Area, Period Area (please refer to "Area Parameters")
6 To Make Measurements
(please refer to "Delay and
DS6000 User's Guide