RIGOL
Normal Print
After "Normal" is selected, please refer to the following steps to set the print
parameters to execute print.
1. Print Range
Press this softkey to select "Screen" (default) or "Wave".
Screen: print the whole screen image.
Wave: only print the waveform and the basic information.
2. Palette
Press this softkey to select "Color" (default) or "GrayScale".
3. Invert
Press this softkey to turn the invert print on or off.
4. Print
After setting the print parameters, press this softkey or press the
key on the front panel directly to execute the print operation.
13-16
13 System Function Setting
shortcut
DS6000 User's Guide