Rigol DS6000 Series User Manual page 236

RIGOL
format. At most 10 setting files (from LocalSetup0.stp to LocalSetup9.stp) can
be stored in internal memory. The stored settings can be recalled.
4. Picture
Save the screen image in external memory in "*.bmp", "*.png", "*.jpeg" or
"*.tiff" format. You can specify the file name and saving directory and save the
corresponding parameter file (*.txt) under the same directory using the same
file name. The recall of image and reference files is not supported.
After selecting this type:
Press Pic Type to select the desired storage format.
Press Para.Save to enable or disable the parameter save function.
Press Inverted to turn the invert function when storing pictures on or off.
Press Color to select the desired color.
Press Header to turn the header display on or off.
Press Footer to turn the footer display on or off.
Tip
After a USB storage device is connected (no PictBridge printer is connected),
press the print key
image under the root directory of the USB storage device in the picture format
currently selected. When a PictBridge printer and USB storage device are
connected at the same time, the printer enjoys higher priority.
5. CSV
Save the waveform data displayed on the screen or of the specified channel in
external memory in a single "*.csv" file. You can specify the file name and the
saving directory and save the corresponding parameter file (*.txt) under the
same directory using the same file name. The recall of CSV and parameter files
is not supported.
After selecting this type:
Press DataDepth to select "Displayed" or "Maximum". After selecting
"Maximum", press Channel to select the desired channel (note that only
channels currently enabled can be selected).
Press Para.Save to enable or disable the parameter save function.
Press Sequence to select whether to add a sequence number to the waveform
point in the CSV file.
12-4
on the front panel to quickly save the current screen
12 Store and Recall
DS6000 User's Guide