Usb Device; To Set The Gpib Address - Rigol DS6000 Series User Manual

RIGOL

USB Device

This oscilloscope can communicate with a PC or PictBridge printer via the USB
DEVICE interface on the rear panel. You need to set the oscilloscope to make it
match with different device types.
Press UTIL  IO Setting  USB Device and use
type.
Computer: under this type, the oscilloscope can communicate with a PC.

PictBridge: under this type, the oscilloscope can communicate with a PictBridge

printer.

To Set the GPIB Address

When using the GPIB method to control the oscilloscope, you need to use the
USB-GPIB interface converter (need to order separately) to extend a GPIB interface
for the oscilloscope.
To set the GPIB address, press UTIL  IO Setting  GPIB and use
the desired address. The default is 1 and the range available is from 1 to 30.
13-6
13 System Function Setting
to select the desired device
DS6000 User's Guide
to input