Rigol DS6000 Series User Manual page 259

13 System Function Setting
IP Configuration Type (DHCP)
The configuration type of the IP address can be DHCP, auto IP or static IP. In
different IP configuration type, the configuration mode of the network parameters
such as the IP address is different.
Press Config Mode and use
this type. When DHPC type is valid, the DHCP server will assign the network
parameters such as the IP address for the oscilloscope.
IP Configuration Type (Auto IP)
Press Config Mode and use
this type. When the auto IP type is valid, disable DHCP manually, Gate and DNS are
added to the right side of the screen and users can define the gateway and DNS
server address of the oscilloscope. In auto IP mode, the oscilloscope will get the IP
address ranging from 169.254.0.1 to 169.254.255.254 and the subnet mask
255.255.0.0 automatically according to the current network configuration.
IP Configuration Type (Static IP)
Press Config Mode and use
this type. When this type is valid, disable DHCP and auto IP manually, IP Address,
Mask, Gate and DNS are added to the right of the screen. At this point, users can
define their own network parameters (such as the IP address) of the oscilloscope.
1. Set the IP Address
The format of the IP address is nnn.nnn.nnn.nnn, where, the range of the first
DS6000 User's Guide
to select "DHCP". Then press down
to select "Auto IP". Then press down
to select "Static IP". Then press down
RIGOL
to select
to select
to select
13-3