To Use The Battery - Rigol DS6000 Series User Manual

1 Quick Start RIGOL

To Use the Battery

This oscilloscope also provides optional rechargeable battery. Please install the
battery by referring to the figure below. When the instrument leaves the factory, the
battery holds certain electricity. When using the battery alone for power supply, a
battery icon and the remaining electricity (not displayed when the AC power
and battery are used at the same time) will be displayed at the lower-right corner of
the screen. When the electricity of the battery is too low, "Low Battery!" will be
displayed.
If you need to recharge the battery, please install the battery correctly and then
connect the oscilloscope to AC power supply to recharge the battery following the
instructions in "To Connect to AC Power Supply". It needs about 15 hours for
recharging the battery.
Battery
Figure 1-6 To Install the Battery
DS6000 User's Guide 1-7