Rigol DS6000 Series User Manual page 292

RIGOL
Measure
Cursor
Auto Measurement
Number of
Measurements
Measurement Range
Statistic Mode
Measurement Statistic
Frequency Counter
16-6
Voltage Deviation between Cursors (△V)
Manual
Reciprocal of △T (Hz) (1/△T)
Time Deviation between Cursors (△T)
Mode
Track Mode Voltage and Time Values of the Waveform
Point
Auto Mode Allow to display cursors during auto
measurement
Maximum, Minimum, Peak-Peak Value, Top Value, Base
Value, Amplitude, Average, Vrms–N, Vrms-1, Overshoot,
Pre-shoot, Area, Period Area, Frequency, Period, Rise
Time, Fall Time, Positive Pulse Width, Negative Pulse
Width, Positive Duty Cycle, Negative Duty Cycle, Delay
A B , Delay A B , Delay A B , Delay A B ,
Phase A B , Phase A B , Phase A B , Phase
A B
Display 5 measurements at the same time.
Screen, Cursor
Extremum, Difference
Average, Max, Min, Standard Deviation, Number of
Measurements
Hardware 6 bits frequency counter
(channels available: DS606x, CH1/CH2; DS610x,
CH1/CH2/CH3/CH4)
16 Specifications
DS6000 User's Guide