Rigol DS6000 Series User Manual page 192

RIGOL
adjustable range of the timeout time is from 100 ns to 1 s. The default is 1
μs.
When "CS" is selected, press SS to enter the SS (chip select line) setting

interface.
― Press Channel and select any channel of CH1 to CH4 as the CS
channel.
― Press Polarity to set the polarity of the chip select channel to high
(
― Press Threshold to set the threshold of the chip select channel.
2. SCLK Setting
Press SCLK to turn on the clock line setting interface.
Press Channel to select any channel (CH1-CH4) as the clock channel.

Press Slope to set the oscilloscope to sample MISO and MOSI on the rising

edge (
Press Threshold to set the threshold of the clock channel.

3. MISO Setting
Press MISO to turn on the MISO data line setting interface.
Press Channel to select any channel (CH1 to CH4) as the MISO channel.

When "None" is selected, this data line will not be set. Note: When the
MOSI data line is set to "None", the MISO data channel cannot be set to
"None".
Press Polarity to set the polarity of the MISO data line to high (

low (
Press Threshold to set the threshold of the MISO data line.

4. MOSI Setting
Press MOSI to turn on the MOSI data line setting interface.
Press Channel to select any channel (CH1-CH4) as the MOSI channel.

When "None" is selected, this data line will not be set. Note: When the
MISO data line is set to "None", the MOSI data channel cannot be set to
"None".
Press Polarity to set the polarity of the MOSI data line to high (

low (
Press Threshold to set the threshold of the MOSI data line.

7-14
) or low ( ).
) or falling edge (
).
).
) of SCLK.
7 Protocol Decoding
) or
) or
DS6000 User's Guide