Power Requirements; Operating Rate; Operating Conditions; Tape - 3M Matic 7000r Instructions And Parts List

4. Specifi cations

4.1 Power Requirements:

Electrical:
Pneumatic: 90 PSIG [6.2 bar], 15 SCFM [425 L/Min @ 21
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord
and a grounded plug. Contact your 3M Representative for power requirements not
listed above.

4.2 Operating Rate:

Belt speed is 0.76 m/s [150 F.P.M.]
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (457mm) apart (minimum).

4.3 Operating Conditions

Use in dry, relatively clean environments at 5
dry boxes.
Note: Machine should not be washed or subjected to conditions causing moisture

4.4 Tape

Scotch
3M-Matic 7000r-7000r3 HS Pro - Type 11800
™
Page 15
44-0009-2152-6 / ECO# 0078045
115 VAC, 60 Hz, 9.5 A , 1/2 hp (1140 watts)
condensation on components.
• To reduce the risk associated with fi re and
explosion hazards:
− Do not operate this equipment in potentially
fl ammable or explosive environments.
pressure-sensitive fi lm box sealing tapes.
®
C/70
0
C to 50 C [40
o o o
Warning
F] Peak Usage.
0
F to 120 F] with clean,
o
North American - ENG
Date Released:
05-22-18