3M Matic 7000r Instructions And Parts List page 123

Operation
(continued)
Figure 3-3
Figure 3-4 and 3-5
Place tape roll on tape drum to
dispense tape with adhesive side
forward. Seat tape roll fully against
back fl ange of drum.
Manually turn tape roll to create
slack tape while pulling tape through
tape applying mechanism until tape is
through and tape is in alignment with
applying roller. Excess tape can be cut
with a scissors at 1/2 inch past the
applying roller.
• To reduce the risk associated with
sharp blade hazards:
- Keep hands and fi ngers away from
tape cutoff blades under orange blade
guards. The blades are extremely sharp.
3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800
™
Page 11
44-0009-2146-8 / ECO# 0078045
Knurled
Roller
Crescent
Tape Guide
Tape
Support
Pad
(underneath)
Warning
Figure 3-4 Tape Loading/Threading
Figure 3-5
Tape Loading/
Threading
Lock Lever
Tape Roll Hub
Latch
(push to release)
Figure 3-6
Tape Hub /
Mechanism Lock
Spring Lock
(under tape core)
Dancer Arm
(optional)
North American - ENG
Date Released:
05-22-18