Taping Head Contents / How To Use Manual - 3M Matic 7000r Instructions And Parts List

Taping Head Contents
AccuGlide
General Information
How to use this Manual
Updating the Manual
3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800
™
Page 3
44-0009-2146-8 / ECO# 0078045
4 High Performance - 2 and 3 Inch Upper and Lower Taping Heads consist of:
™
Qty. Part Name
1 Taping Head Assembly
1 Tape Drum and Bracket Assembly
This instruction manual covers safety aspects, handling and transport, storage, unpacking,
preparation, installation, operation, set-up and adjustments, technical and manufacturing
specifi cations, maintenance, troubleshooting, repair work and servicing, electric diagrams,
warranty information, disposal (ELV), a glossary with a defi nition of symbols, plus a parts
list of the 3M-Matic™ Accuglide 4 (2 and 3 inch) 3M Industrial Adhesives and Tapes Division
3M Center, Bldg. 220-5E-06 St. Paul, MN 55144-1000 (USA) Edition April 2018 /
Copyright 3M 2018. All rights reserved The manufacturer reserves the right to change
the product at any time without notice.
Publication © 3M 2018. 44-0009-2146-8.
The manual is an important part of the machine; all information contained herein is
intended to enable the equipment to be maintained in perfect condition and operated
safely. Ensure that the manual is available to all operators of this equipment and the
manual is kept up to date with all subsequent amendments. Should the equipment be
sold or disposed of, please ensure that the manual is passed on with the machine.
Keep the manual in a clean and dry place near the machine. Do not remove, tear or
rewrite parts of the manual for any reason. Use the manual without damaging it.
However, if the manual has been lost or damaged, ask your after sale service for a new
copy (if it is possible, please have the manual name, part number, and revision information
and/or model/machine name, machine type, and serial number) that are located on the
identifi cation plate:
(For example: Model - Accuglide 4 - 2 and 3" - Type 11800 - Serial Number 13282).
Note: All the important warning notes related to the operation of the machine are
identifi ed by the symbol:
Modifi cations to the machine are subject to manufacturer's internal procedures.
The user may receive pages or parts of the manual which contain amendment
made after its fi rst publication. The user must use them to update this manual.
North American - ENG
Date Released:
05-22-18