Power Requirements; Operating Rate; Operating Conditions; Tape - 3M -Matic 200a Instructions And Parts List

4-SPECIFICATIONS

4.1 Power Requirements

Electrical: 120 Volt, 60Hz, 2 A (240 watts)
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.

4.2 Operating Rate

Up to 30 cases per minute, depending on box length. Box drive belt speed is approximately 0.38 m/s [75 feet
per minute].

4.3 Operating Conditions

IMPORTANT SAFEGUARD
Use in dry, relatively clean environments at 5
Note: Machine should not be washed or subjected to conditions causing moisture condensation on
components.

4.4 Tape

Scotch
® pressure-sensitive fi lm box sealing tapes.

4.5 Tape Width

36mm [1 1/2 inch] minimum to 48mm [2 inch] maximum
200a-NA
C to 50
o o
WARNING
•
To reduce the risk associated with f re
and explosion hazards:
−
Do not operate this equipment in poten-
tially fl ammable or explosive environments.
12
C [40 F to 120 F] with clean, dry boxes.
o o
2011 June