3M Matic 7000r Instructions And Parts List page 83

16. Technical Documentation and Information
7000r-7000r3 HS Pro Random High
Speed Case Sealer, Type 11800
Frame Assemblies
To Order Parts:
1. Refer to fi rst illustration,
Frame Assemblies, for the
Figure Number that identifi es
a specifi c portion of the machine.
2. Refer to the appropriate Figure
or Figures to determine the
parts required and the parts
reference number.
3. The Parts List that follows
each illustration, includes the
Reference Number, Part Number
and Part Description for the
parts on that illustration.
Note – The complete description
has been included for standard
fasteners and some commercially
available components. This has
been done to allow obtaining
these standard parts locally,
if desired.
4. Order parts by Part Number,
Part Description and Quantity
required. Also include the
model/machine name, machine
type, and serial number that are
located on the identifi cation plate.
5. Refer to the fi rst page of this
instruction manual "Replacement
Parts and Service Information"
for replacement parts ordering
information.
Important – Not all the parts listed
are normally stocked items.
Some parts or assemblies shown
are available only on special order.
Contact 3M/Tape Dispenser
Parts to confi rm item availability.
3M-Matic 7000r-7000r3 HS Pro - Type 11800
™
Page 71
44-0009-2152-6 / ECO# 0078045
(continued)
Options and Accessories:
For additional information on the options and
accessories listed below - contact your
3M Representative.
Part Number Option / Accessory
70-0064-2998-2 Caster Kit Attachment
70-0067-5966-9 Conveyor Extension Attachment
70-0075-1424-6 AccuGlide™ 4 Upper Taping
Head - 2 inch, w/blade retract
70-0075-1425-3 AccuGlide™ 4 Lower Taping
Head - 3 inch, w/blade retract
70-0075-1426-1 7000r HS Tape Application
Monitor (TAM - Factory Installed)
North American - ENG
Date Released:
05-22-18