Power Requirements; Operating Rate; Operating Conditions; Machine Noise Level - 3M -Matic 8000a Instructions And Parts List

4. Specifi cations

4.1 Power Requirements:

Electrical – 120 VAC, 60 Hz, 3.25A, 390 Watt
The machine is equipped with two 1/6 HP gearmotors and comes with a 2.4m [8 foot]
standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.
4.2 Operating Rate: Belt speed is 0.5m/s [100 F.P.M.]
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (457mm) apart minimum.

4.3 Operating Conditions

Use in dry, relatively clean environments at 5
dry boxes.
Note:

4.4 Machine Noise Level:

appropriate instrument:(Type SPYRI-MICROPHON 11).
3M-Matic 8000a-8000a3
™
Page 12
Machine should not be washed or subjected to conditions causing moisture
condensation on components.
• To reduce the risk associated with fi re and
explosion hazards:
− Do not operate this equipment in potentially
fl ammable or explosive environments.
Acoustic pressure measured at a distance of 1m. from machine with Scotch PVC
adhesive tape in operation; 78dB Acoustic radiation pressure at 1.6m height with
Scotch PVC adhesive tape in operation; 73dB Measurement taken with
C to 50 C [40
o o
WARNING
F to 120 F] with clean,
o o
NA - ENG
April 2016