Power Requirements; Operating Rate; Operating Conditions; Tape - 3M -Matic 800a3 Instructions And Parts List

4-SPECIFICATIONS

1. Power Requirements

Electrical: 115 Volt, 60Hz, 3.8 A (220 watts)
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.

2. Operating Rate

Belt speed is 0.5m/s [100 ft/min].
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (455mm) apart minimum.

3. Operating Conditions

IMPORTANT SAFEGUARD
Use in dry, relatively clean environments at 5
Note: Machine should not be washed or subjected to conditions causing moisture condensation on
components.

4. Tape

Scotch
® pressure-sensitive fi lm box sealing tapes.

5. Tape Width

50mm [2 inch] minimum to 75mm [3 inch] maximum
800a3-NA
o C to 50
WARNING
•
To reduce the risk associated with fire
and explosion hazards:
−
Do not operate this equipment in poten-
tially fl ammable or explosive environments.
12
o C [40 o F to 120 o F] with clean, dry boxes.
2011 September