3M Matic 7000r Instructions And Parts List page 60

12. Operation
12.9 Trouble Shooting Guide (continued)
Problem
Tape Incorrectly Cutting
Tape Leg too long Tape
Leg too long
Boxes Damaged
3M-Matic 7000r-7000r3 HS Pro - Type 11800
™
Page 48
44-0009-2152-6 / ECO# 0078045
(continued)
Cause
Tape tension too high or too low
Tension Roller Binding
Blades dull-loose/dry pad/damaged
Cutting Problems (see above)
Arm Retract Photo Eye Sensor
incorrectly set
Arm Retract Photo Eye Sensor
incorrectly set
Cut-Off Bracket incorrectly releasing/
Timing off
Centering Arms not closing
Centering Arms closing and not
re-opening
Centering Arms moving too slowly
Correction
Adjust Tape Head Tension
Loosen or Lubricate Tension Roller
Tighten Blade Screws/oil pad/
replace blade
(see above)
Re-position Arm Retract Photo
Eye Sensor (see above)
Re-position Arm Retract Photo
Eye Sensor
Re-position Bed Senso
Check Bracket for Binding
Reduce Control Regulator Pressure
Check Air Supply/adjust
Check Photo Eye Function
Check and Adjiust Air Supply /
Flow Control
North American - ENG
Date Released:
05-22-18