Power Requirements; Operating Rate; Operating Conditions; Tape - 3M -Matic 700r3 Instructions And Parts List

4-SPECIFICATIONS

4.1 Power Requirements

Electrical: 115 Volt,60Hz, 3.8 A (440 watts)
Pneumatic – 5 bar gauge pressure [70 PSIG] 110 litre/min @ 21 C, 1.01 bar [3.75 SCFM] at 15 boxes per
minute A pressure regulator is included
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.

4.2 Operating Rate

Box drive belt speed is approximately 0.5 m/s [100 feet per minute].
45
40
35
30
25
20
15
10
5
0
0

4.3 Operating Conditions

IMPORTANT SAFEGUARD
Use in dry, relatively clean environments at 5
Note: Machine should not be washed or subjected to conditions causing moisture condensation on
components.

4.4 Tape

Scotch
® pressure-sensitive fi lm box sealing tapes.

4.5 Tape Width

48mm [2 inch] minimum to 76mm [3 inch] maximum
700r3-NA
5 10 15
C to 50
o
WARNING
•
To reduce the risk associated with fire
and explosion hazards:
−
Do not operate this equipment in poten-
tially fl ammable or explosive environments.
20 25 30
C [40 F to 120 F] with clean, dry boxes.
o o o
14
35 40
2012 January