Installation; Operating Conditions; Space Requirements For Machine Operation And Maintenance; Tool Kit Supplied With The Machine - 3M Matic 7000r Instructions And Parts List

7. Installation

7.1 Operating Conditions

The machine should operate in a dry
and relatively clean environment
(See Specifi cations).
7.2 Space Requirements for
Machine Operation and
Maintenance Work
Minimum distance from wall
(Figure 7-1):
A = 1000mm.
B = 700mm.
Minimum height = 2700mm.
7.3 Tool Kit Supplied with Machine
A tool kit containing some tools are
supplied with the machine. These
tools should be adequate to set-up
the machine, however, other tools
supplied by the customer will be
required for machine maintenance.
7.4 Machine Set-Up / Bed Height
1 - Lift the machine with belts or
To set the machine bed height,
do the following:
2 - Adjust machine bed height.
The legs can be adjusted to set
diff erent machine bed heights
(Figure 7-3).
Also refer to "Specifi cations"
3 - Lock the screws.
4 - Repeat the operation for all legs.
3M-Matic 7000r-7000r3 HS Pro - Type 11800
™
Page 21
44-0009-2152-6 / ECO# 0078045
ropes paying attention to place
the belts at points on frame to
avoid any possible damage
(Figure 7-2).
The case sealer is equipped
with four (4) adjustable legs
that are located at the corners
of the machine frame.
(It is not necessary to fi x or
anchor the machine to the fl oor).
B
A
Figure 7-2
Figure 7-1
Figure 7-3
North American - ENG
Date Released:
05-22-18