Specifi Cations - 3M Matic 7000r Instructions And Parts List

Specifi cations

1. Tape:
For use with Scotch
2. Tape Width:
48mm [2 inches] to 72mm [3 inches].
3. Tape Roll Diameter:
Up to 390mm [15 1/2 inches] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4. Tape Application Leg Length -
1.25 inches [31mm] to 2.75 [70mm]inches.
5. Box Size Capacities:
For use with center seam regular slotted containers.
When upper and lower taping heads are used on "3M-Matic" case sealers, refer to the
respective instruction manual specifi cations for box weight and size capacities.
6. Operating Rate:
Conveyor speeds up to 0.76m/s [150fpm] maximum.
Note: Higher speeds require special taping head adjustment.
7. Operating Conditions:
Use in dry, relatively clean environments at 5° to 40°C [40° to 105°F] with clean dry boxes.
Important – Taping heads should not be washed down or subjected to conditions causing
8. Taping Head Dimensions:
Length –
Height –
Width
Weight –
3M-Matic Accuglide 4 - 2 and 3 Inch Taping Head - Type 11800
™
Page 6
44-0009-2146-8 / ECO# 0078045
pressure-sensitive fi lm box sealing tapes.
®
moisture condensation on components.
380mm [14.96 inches]
363mm [14.29 inches] (with tape)
– 2" Tape Head 3.15 inches [80mm] - 3" Tape Head 4 inch [101mm]
Packaged: 2" - 14.3 lbs. [6.49kg]
Unpackaged: 2" - 12.9 lbs [5.85kg]
fi lm tapes.)
®
3" - 15.1 lbs. [6.85kg]
3" - 13.9 lbs. [6.30kg]
(Specifi cations continued on next page.)
North American - ENG
Date Released:
05-22-18