Set-Up And Adjustments; Box Width Adjustment; Box Height Adjustment; Box Side Guides Width Adjustment - 3M Matic 7000r Instructions And Parts List

11. Set-Up and Adjustments

11.1 Box Width Adjustment

Boxes are automatically centered by
Side Guides. The Box Centering
Guides are triggered by Box Centering
Photo Sensor located on side of the
infeed conveyor (Figure 11-1).
Side Guides air pressure adjustments
can be made using Centering Guide
Air Pressure Regulator (Figure 11-1).

11.2 Box Height Adjustment

Box Height is automatically determined
when the Upper Drive Assembly Box
Raising Switch is activated by box
pressure. The Box Raising Switch
which located on the front of the
Upper Drive Assembly (See Figure 11-2).
Upper Drive air pressure adjustments
can be made using the Air Counter
Balance Pressure Regulator and
Gauge for the Upper Drive Assembly
(See Figure 9-6).
11.3 Box Centering Side Guides Width Adjustment
For Optimal Box processing speed,
the maximum box width can be limited
to width of boxes to be taped. Make this
adjustment by turning the Adjusting
Knob clockwise (decreasing maximum
width) or Counterclockwise (increasing
maximum width). This Knob Adjustment,
in eff ect, allows for a "stop" that limits the
Side Guides full position (Figure 11-1).

11.4 Removing Taping Heads

1. Activate Upper Drive Box Raising Switch
to lift upper drive assembly. Use lock
knobs to lock Upper Drive in raised position.
2. Turn off Electricity and Air Pressure.
3. Loosen plate knobs and slide Tape Head
retaining plate forward (Figure 11-3).
4. Hold upper taping head applying and buffi ng
arms from under upper assembly and slide
tape head forward and down to remove.
5. For Lower Taping Head, slide head forward
and lift.
6. Refer to Manual 2 for additional taping
head set-up instructions.
7. Replace taping heads reverse of disassembly
before turning on air supply/electric power.
8. Unlatch Upper Drive Assembly and allowing
Upper Drive to return to its rest position.
3M-Matic 7000r-7000r3 HS Pro - Type 11800
™
Page 42
44-0009-2152-6 / ECO# 0078045
Centering
Side Guides
Air Regulator
-
-
Box Centering
Side Guides
Width Adjustment Box Centering Photo Sensor
Upper Drive
Upper Drive
Box Raising
Assembly
Lock/Release
Knob (2)
Figure 11-3
Warning
•
To reduce the risk associated with
sharp blade hazards:
−
Keep hands and fi ngers away from tape
cutoff blades under orange blade guards.
The blades are extremely sharp.
Figure 11-1
Centering
Side Guides
Switch
Box
Direction
Figure 11-2
North American - ENG
Date Released:
05-22-18