Factory Settings - 3M Matic 7000r Instructions And Parts List

11. Set-Up and Adjustments

11.7 Factory Settings

(also Refer to Electrical Schematics in Section 16)
Upper Head Blade Retract
Flow Control / V25
(3 turns Clockwise from Full Open
Counter Clockwise position)
Lower Head Blade Retract
Flow Control / V24
(3 turns Clockwise from full Open
Counter Clockwise position)
37cm /14.6"
Case Exit PE / B7
Main Pressure Switch
Set at 55 psig trip / SP1
Main Air Regulator
90 psig
3M-Matic 7000r-7000r3 HS Pro - Type 11800
™
Page 44
44-0009-2152-6 / ECO# 0078045
(continued)
Component
Symbol Description
Main Air Regulator
R1 Counter Balance Regulator
R2 Centering Arm Regulator
SP1 Main Pressue Switch
V16 Air Cylinder Centering Arm - Fully open (CCW full)
Flow Control - Guides open
V17 Air Cylinder Centering Arm - Fully open (CCW full)
Flow Control - Guides closed
B1 Centering Arm PE
B4 Case Present PE
B5 Lower Head Blade Retract
(Cut-Off ) PE
B6 Upper Head Blade Retract '
(Cut-Off ) PE
B7 Case Exit PE
V24 Lower Head Blade Retract
Flow Control
V25 Upper Head Blade Retract
Flow Control
67cm /26.4"
35cm/13.8"
11.5cm/4.5"
4cm/1.6"
Lower Head Blade Retract (Cut Off ) PE / B5
Upper Head Blade Retract (Cut Off ) PE / B6
Factory Setting
90 psig
30 psig
3.75 CCW turns from
full close (CW position)
55 psig
67cm/26.4" (front of column)
35cm/13.8 (front of column)
11.5cm/4.5" (front of column)
4cm/1.6" (front of column)
37cm/14.6" (front of column)
3 turns CW from full open
(CCW position)
3 turns CW from full open
(CCW position)
Air Cylinder Centering Arm
Flow Control / V16 and V17
(Fully Open - Counter Clockwise)
Case Present PE / B4
Centering Arm PE / B1
Counter Balance Regulator
30 psig / R1
Centering Arm Regulator / R2
(3.75 Counter Clockwise turns
from full closed Clockwise position)
North American - ENG
Date Released:
05-22-18