Power Requirements; Operating Rate; Operating Conditions; Machine Noise Level - 3M Matic 7000a Instructions And Parts List

4-SPECIFICATIONS

4.1 Power Requirements:

Electrical – 120 VAC, 60 Hz, 6A
The machine is equipped with two 1/6 HP gearmotors and comes with an 2.4m [8 foot] standard neoprene
covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed
above. Contact your 3M Representative for power requirements not listed above.

4.2 Operating Rate:

IMPORTANT SAFEGUARD
Actual production rate is dependent on operator's dexterity. Boxes must be 18 inches (457mm) apart minimum.

4.3 Operating Conditions

Use in dry, relatively clean environments at 5
Note: Machine should not be washed or subjected to conditions causing moisture condensation on
components.
4.4 Machine Noise Level: Acoustic pressure measured at a distance of 1m. from machine with
Scotch PVC adhesive tape in operation; 78dB Acoustic radiation pressure at 1.6m. height with
Scotch PVC adhesive tape in operation; 73dB Measurement taken with appropriate instrument:
(Type SPYRI-MICROPHON 11).
4.5 Set-Up Recomendations:
• Machine must be level.
• Customer supplied optional infeed and exit conveyors (if used) should provide straight and level box entry/exit.
• Optional exit conveyor (powered or gravity) can help move sealed boxes away from machine.
7000a-7000a3 Pro - NA
Belt speed is 0.5m/s [100 F.P.M.]
• To reduce the risk associated with f re
and explosion hazards:
− Do not operate this equipment in potentially
fl ammable or explosive environments.
C to 50 C [40 F to 120
o o o
WARNING
12
F] with clean, dry boxes.
o
2014 June