Power Requirements; Operating Rate; Operating Conditions; Machine Noise Levels - 3M -Matic 7000r-I Instructions And Parts List

4. Specifications

4.1 Power Requirements:

Electrical – 230/400 Volt, 50 Hz., SCCR: 5kA
Pneumatic: 90PSIG [6.2 bar], 11.6 SCFM [1200 NL/Min] Peak Usage.
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord.
Contact your 3M Representative for power requirements not listed above.
4.2 Operating Rate: Belt speed is 0..5m/s [100 F.P.M.]
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (457mm) apart minimum.

4.3 Operating Conditions

Ingress protection: IP4X. Use in an indoor dry, relatively clean environment,
Note:
Machine should not be washed or subjected to conditions causing moisture
condensation on components.
4.4 Machine Noise Level (measured at workplace):
Weighted emission sound pressure level/workplace 81,2db
Uncertainty
A-Weighted sound power level
Uncertainty
The use of hearing protection is recommended
Note: Noise levels will vary and are dependant on the pressure sensitive tape used in
the application. The sum of measured value of noise plus its associated
uncertainty represents an upper limit of range of values. Idling refers to
machine running in rest position (no boxes). Under Load refers to machine
running and box taping using adhesive tape 3M-Scotch 75mm (3")
AccuGlide - Bottom Taping Head.
3M-Matic 7000r-I / 7000r3-I Pro - Type 11700
™
Page 14
44-0009-2165-8 / ECO# 0078045
50% Relative Humidity, 5 o C to 40 o C [40 o F to 104 o F],
maximum elevation of 1000 meters (3281 ft) with clean, dry boxes.
Warning
• To reduce the risk associated with fire and
explosion hazards:
− Do not operate this equipment in potentially
flammable or explosive environments.
Original Instructions
Source Document for all related Manuals/Translations
Under Load Idling
68 .0db
3db 3db
92,6db 79,4db
3db 3db
International - ENG
February 2021