Power Requirements; Operating Rate; Operating Conditions - 3M -Matic 7000a-I Instructions And Parts List

4. Specifications

4.1 Power Requirements:

Electrical – 230/400 Volt, 50 Hz., SCCR: 5kA
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord.
Contact your 3M Representative for power requirements not listed above.
4.2 Operating Rate: Belt speed is 0.5m/s [100 F.P.M.]
Actual production rate is dependent on operator's dexterity.
Boxes must be 18 inches (457mm) apart minimum.

4.3 Operating Conditions

Ingress protection: IP4X. Use in an indoor dry, relatively clean environment,
Note: Machine should not be washed or subjected to conditions causing moisture
3M-Matic 7000a-I / 7000a3-I Pro - Type 11700
™
Page 13
44-0009-2164-1 / ECO# 0078045
50% Relative Humidity, 5 o C to 40 o C [40 o F to 104 o F],
maximum elevation of 1000 meters (3281 ft) with clean,
dry boxes.
condensation on components.
• To reduce the risk associated with fire and
explosion hazards:
− Do not operate this equipment in potentially
flammable or explosive environments.
Source Document for all related Manuals/Translations
WARNING
Original Instruction
International - ENG
February 2021