Glue Replacement - Horizon Fitness BQ-270 Manual

5-7 Glue Replacement

If the glue becomes brown or sticky, the glue is getting
old. Replace the glue by following the procedure below.
Check that the glue is melted completely
before beginning this operation, and then
turn off the power switch. Drain the glue
quickly before it hardens.
WARNING
The melt tank may be heated to 200
degrees Celsius (400 Fahrenheit), and may
cause severe skin burns. Wear tightly-
woven cotton gloves when draining the
glue.
Find a container for the drained
glue (capacity 4 liters or 1.25 gal-
lons). Get the drain guide and a
cloth to wipe up the glue.
Press the button on the Single
Operation Screen Part 2 to lower
the melt tank.
Turn off the power switch and open
the lower nipper lower.
WARNING
For the box to catch the glue, use a
durable one against the heat. It is
dangerous when the box is broken
or cracks.
Hook the drain guide on the attach-
ing screws on the melt tank.
- The attaching screws should already be
installed on the melt tank.
Place the container for the drained
glue under the drain guide.
81
Attaching
Screws
Drain Guide